The newest (2015) package of firmware for all VX-1 equipped with oryginal Li/Li+ battery or one of our Valence based 40s LiFePO4 packs - VX-1 Li Firmware Package (40s LiFe rev 3_ 2015)

Firmware packaged has to be dowloaded, unzip. To upload it to the bike you need Diagnostic Application and Diagnostic Cable.

Before uploading check what revision is installed on your BMS. If you can't read it (red field with N/A) - you may have old revision without CANBus bootloader - contact us.

This article was helpful for 6 people. Is this article helpful for you?