Headlight Replacement S-XC-S00092

1. Remove the windshield. Refer to S-XC-S00286

2. Remove the console top cover (Drawing below - 2) - pull gently by hand




3. Remove the front louver screws (1) [PH2 head] and louvers




4. Remove 4 headlamp assembly retaining bolts (1) - [10mm Hex]





5. Remove the upper fairing screws (1).





6. Remove the fairing bolt (2), retain any alignment shims (3) removed for reassembly.



7. Remove Headlight and disconnect cables, pressing the locks of the upper connector and using a flat screwdriver for the lower connector lock.


This article was helpful for 4 people. Is this article helpful for you?

This is really cool property blog.Its very informative as well. By the way, admire your good

https://www.wizessay.com/coursework-writing-service/

online with such amazing information as well.Thanks.

How can I test my NiMH battery to see which ones are not good and which ones are good?